Nickel Alloys

Corrosion- and heat-resistant nickel-base alloys, including the Hastelloy, Inconel, Incoloy and Nimonic families, used where chemical attack and elevated temperature occur together.

Grades: 52
Elements tabulated: 11

Overview

Corrosion- and heat-resistant nickel-base alloys, including the Hastelloy, Inconel, Incoloy and Nimonic families, used where chemical attack and elevated temperature occur together.

IMS handles nickel alloys as both prime material and as arisings recovered from industrial processing. Material is sorted and segregated by grade, so it returns to the melt as a known specification rather than a mixed stream.

Sectors we supply this into

Properties

Heat Resistant
Corrosion Resistant
Acid Resistant

Applications

Chemical and Food Industry
Aero Engine Parts

Discuss this material

Chemical composition

52 grades · percentage by weight

Nominal chemical composition of Nickel Alloys grades handled by IMS, in percentage by weight. * indicates maximum. The figures shown are nominal compositions of the various alloys.
Grade	Ni	Cr	Co	Mo	W	Fe	Al	Ti	Cu	Nb	Others
Hastelloy A	57	1.0*	–	21	–	19	–	–	–	–	–
Hastelloy B	62	1.0*	2.5*	28	–	5.5	–	–	–	–	0.4 V
Hastelloy B2	66	1.0*	0.75*	28	–	2.0*	0.4*	–	–	–	–
Hastelloy C276	56	16	2.5*	17	4	5.5	0.4*	–	–	–	0.35* V
Hastelloy C22	54	21	2.5*	14	3	5.0*	0.4*	–	–	–	0.35* V
Hastelloy C4	54	16	1.25*	16	–	2.0*	0.4*	0.5*	–	–	–
Hastelloy D	85	1.0*	–	–	–	1.0*	–	–	4.0*	–	9 Si
Hastelloy F	45	22	2.5*	6	1.0*	18	–	–	–	2	–
Hastelloy G	44	22	–	6.5	1.0*	20	–	–	2	2	–
Hastelloy N	72	7	0.2	16.5	0.5	5.0*	0.25	0.25	–	–	0.01 B
Hastelloy R	66	15.5	1.5*	5	–	7.0*	2.2	2.5	–	–	–
Hastelloy S	68	15.5	–	14.5	–	1	–	–	–	–	0.5 Mn
Hastelloy W	63	5	2.5*	24.5	–	5.5	–	–	–	–	0.6 V
Hastelloy X	47	22	1.5	9	0.6	18.5	–	–	–	–	–
Langalloy 4R	65	–	–	30	–	5	–	–	–	–	–
Langalloy 5R	57	16	–	17	5	5	–	–	–	–	–
Langalloy 7R	58	23	–	6	2	5	–	–	6	–	–
PE 7	37	18	2	5	–	35	1.2	1.2	–	–	–
PE 10	64	20	–	6	2.5	–	–	–	–	6.5	–
PE 11	38	18	–	5.2	–	34	0.8	2.3	–	–	–
PE 13	48	22	1.5	9	0.6	18.5	–	–	–	–	–
PE 16	44	16.5	–	3.5	–	33	1.2	1.2	–	–	–
Illium G	57	22.5	–	6.4	–	6.5	–	–	6.5	–	–
Illium R	64	22	–	5	–	6	–	–	2.5	–	–
C130	62	22	–	10	–	0.5	1	2.7	–	–	–
Inconel 600	75.5	15.5	–	–	–	7	–	–	–	–	–
Inconel 601	60.5	23	–	–	–	14.1	1.35	–	–	–	–
Inconel 625	61	21.5	–	9	–	3	–	–	–	3	–
Inconel 690	61	29	–	–	–	9	–	–	–	–	–
Inconel 702	79	15.6	–	–	–	0.4	3.4	0.7	–	–	–
Inconel 706	41.5	16	1	–	–	36	–	1.75	–	2.9	–
Inconel 713C	72	13.4	–	4.5	–	1.5*	6.2	1.0*	–	2.3	–
Inconel 718	53	18.5	–	3	–	18	–	0.8	–	5	–
Inconel W(722)	75	15	–	–	–	6.5	0.6	2.4	–	–	–
Inconel X(X750)	73	15	1	–	–	7	0.9	2.5	–	0.9	–
GMR 235	63	15.5	–	5.2	–	10	3.7	2	–	–	0.06 B
IN-102	67	15	–	2.9	3	7	0.5	–	–	2.9	–
IN-162	74	10	–	4	2	0.5	6.5	1	–	1	2.0 Ta
IN-657	49	48	–	–	–	–	–	–	–	1.5	–
Incoloy 800	32	20	–	–	–	47	–	–	–	–	–
Incoloy 825	40	21	–	3	–	32	–	1	2	–	–
Incoloy 901	42	12.5	1.0*	5.7	–	35	0.35*	2.9	–	–	–
Incoloy DS	37	18	–	–	–	42	–	–	–	–	2.3 Si
R55	52	23	–	4	2	8	–	–	6	–	4.0 Si
AISI 310(HK)	20	25	–	–	–	BAL	–	–	–	–	2 Mn
AISI 330(HT)	35	15	–	–	–	BAL	–	–	–	–	2.5 Si
Nimonic 75	77	20	–	–	–	5.0*	0.15	0.4	–	–	–
Nimonic 80	74	20	2.0*	–	–	1.5*	1.3	2.2	–	–	–
Nimonic 81	65	30	–	–	–	1.0*	1	1.75	–	–	–
Nimonic 86	64.5	25	–	10	–	–	–	–	–	–	0.15 Mn
Nimonic 942	48	12.5	1.0*	5.5	–	25	4	3.7	–	–	0.015 B
PD16 (PD21)	71	6	1.0*	2	11	–	6	0.2	–	1.5	0.02 B

Select grades to compare them side by side, or save them to a shortlist.

* indicates maximum. The figures shown are nominal compositions of the various alloys. Values are reproduced from IMS technical data and are provided for identification purposes; confirm the specification against your own requirement before ordering.

Scroll the table sideways to see all elements, or switch to cards above.